RedBox Fury
A WiFi garage-door controller for up to 4 garage-door openers, plus a 5th door/input sensor for that extra side door — with optional temperature/humidity sensing and a single-light status indicator. Works with Elan natively — no Magic Cube required, and it's no cloud required to use it.
⚠️ Secondary control only — not a life-safety device. Works alongside your manufacturer controls, never replaces them.
Three RedBox Fury variations
Choose by opener count and your opener's Security+® rolling-code generation. Every version adds a 5th door/input sensor (the extra side door) and the optional Temp/Humidity module.
Fury-4 / S2
Works with Security+ 2.0®- 4 garage-door openers
- + 5th door/input sensor (side door)
- Optional Temp & Humidity sensor
- For Chamberlain®/LiftMaster® openers with a Security+ 2.0® (yellow) learn button — also covers Security+ 315/390 MHz
Fury-2 / S3
Works with Security+ 3.0®- 2 garage-door openers
- + 5th door/input sensor (side door)
- Optional Temp & Humidity sensor
- For Chamberlain®/LiftMaster® openers with a Security+ 3.0® (white) learn button
Fury-4 / S3
Works with Security+ 3.0®- 4 garage-door openers
- + 5th door/input sensor (side door)
- Optional Temp & Humidity sensor
- For Chamberlain®/LiftMaster® openers with a Security+ 3.0® (white) learn button
| Feature | Fury-4 / S2 | Fury-2 / S3 | Fury-4 / S3 |
|---|---|---|---|
| Garage-door openers | 4 | 2 | 4 |
| Opener compatibility | Security+ 2.0® | Security+ 3.0® | Security+ 3.0® |
| 5th door/input sensor | ✓ | ✓ | ✓ |
| Temp & Humidity sensor | Optional | Optional | Optional |
| Elan native (no Magic Cube) | ✓ | ✓ | ✓ |
| Magic Cube & Home Assistant | ✓ | ✓ | ✓ |
Openers 1–4 have control relays; the 5th is a sensor-only input — perfect for that extra side door. Optional RS485 module: Generic XY-MD02 or InnovoHT, with calibration offsets.
Will RedBox Fury fit your opener?
RedBox Fury controls your existing opener over WiFi, so the one thing to match is your opener's Security+® rolling-code generation — shown by the color of its LEARN button. Pick your color, or look up your model.
Pick a color or search a model
Waiting for your opener
Your recommendation appears here.
Openers are identified here by LEARN-button color and radio frequency — factual attributes of the hardware. Chamberlain®, LiftMaster®, myQ® and Security+® / Security+ 2.0® / Security+ 3.0® are trademarks of Chamberlain Group, LLC. RedBox Fury is an independent Innovo product; these references are for compatibility identification only and do not imply affiliation or endorsement. Confirm your opener before ordering.
Local garage control, done right
Up to 4 openers + side door
4 garage-door openers with control relays and per-door open/closed state sensors, plus a 5th sensor-only input for that extra side door. Adjustable cycle time and momentary mode per opener.
Optional temp & humidity
Plug in an RS485 module (XY-MD02 or InnovoHT) for room temperature and humidity, with calibration offsets — no separate enable needed.
Elan native — no Magic Cube
Works with Elan natively, no Magic Cube required. Also fully compatible with the Magic Cube and Home Assistant. No cloud is required to operate it; cloud check-in is optional for updates.
One-light status
A single status light shows the most important thing at a glance — solid blue = connected to HA, yellow = a door open, green-slow = update available, and more.
3-screen onboarding
First-time setup over the device's own WiFi: accept terms → register to your dealer account → pick WiFi. Online and registered in minutes.
Per-door tuning
Cycle time, momentary mode (Full Cycle / Final On / Final Off), contact polarity (Normal/Reverse), and a diagnostic trigger color per door.
RedBox Fury
Docs & downloads
Add local garage control
Pick the RedBox Fury version for your door count and your opener's Security+® generation, then order on the shop.