This is a two-way driver to control and get feedback from supported Magic Cube based Lights. The driver supports, Switches, Dimmers, Light Temperatures, RGB/W/WW. The driver will detect when changes happen outside of the Nice System. The driver is also capable of getting Lighting Groups and creating a single switch for a group of lights connected in the Magic Cube.
If your brand is not listed, please reach out to support@innovo.net with model information.
- Support for Innovo’s Magic Devices
- Auto Discovery of all lights connected to Magic Cube based on manufacturer
- Auto Discover garage doors and install them as lighting devices
- Open listen socket for faster instead of feedback
- Self Healing connection monitor.
- Fast LAN based operation – No internet connection required – For devices that support LAN modes.
- Auto Discovery and Installation of Magic Cube Controller
- Smart Device Installer Settings Page.
- Control Dimming Settings (On / Off / Brightness)
- Control Dimming of Light Bulbs (On / Off / Brightness) [Does not control Temperature or RGB]
- Control Light Settings (On / Off)
- Read Feedback from the lights
- Sync with the lights if changes occur outside of Elan
- Supports any light switch or dimmer that works with Magic Cube
- Mix and Match from different lighting manufacturers in one driver
Any Light Switch or Dimmer that operates from Home Assistant including Insteon.
Magic Cube Light works with Bond Bridge Wiz Lights Tuya Lights Insteon Lights Control 4 Lights Phillips Hue Phillips Dynalite LIFX Lightwave OVeRKIZ | MyQ Garage Doors Aladdin Garage Doors Somfy Blinds Eufy Everlights Ikea Lights Feit Electric Leviton Decora Xiaomi Yeelights And Many Many More.
|
Related products
-
HIDD
This Driver Uses Our New License. To Purchase Click Here -
UpdatedMagic Cube Sensors (T/H/Motion/Lux/AQ)
To Purchase Click Here -
WatchDog Network monitor and event trigger
Please Login to See Pricing Quick ViewPlease Login to See PricingWatchDog Network monitor and event trigger
Please Login to See Pricing
Please Login to See PricingMonitor any local LAN TCP network host from Elan and create event maps for Host Up / Host Down State.
The driver does not use PING but tries to connect to an actual TCP socket on the host and report the connection status. This is more reliable for monitoring services and hosts rather than just hosts.
For a trial version, click here. To purchase a license Add to Cart Below.
-
UFO LED Driver (Controller sold separately)
This driver uses our Controller Pro License. -
Wake-On-LAN
Please Login to See Pricing Quick ViewPlease Login to See PricingWake-On-LAN
Please Login to See Pricing
Please Login to See PricingThis is a supported unique two-way implementation of a Wake-On-LAN driver with feedback.
For a trial version, click here. To purchase a license Add to Cart Below.
-
Govee Pro
Please Login to See Pricing Quick ViewPlease Login to See PricingGovee Pro
Please Login to See Pricing
Please Login to See PricingThis is a complete rework from the ground up of our popular Govee driver. This driver has been elevated to Pro level.
The Pro driver will install two lighting sub-drivers, one for LAN (if available) and one for Cloud (if available). It supports both LAN mode devices and Cloud devices with Innovo’s signature Device Intelligence Detection. The driver will recognize if the device is cloud or LAN based and add it to the appropriate section without duplicating a device across.
We have also enhanced our timeout and cloud rate limit handling with our Elastic Polling technology. While this doesn’t no eliminate rate limits for cloud accounts, it cuts it down significantly. And since we separate the LAN based devices, rate limits don’t apply and we can poll as often as needed.
Govee makes affordable and brilliant LED and LED Strip lights. Connect them to Nice and bring a little brightness to your project.
The Driver Supports
- Auto Installation For Govee(LAN,Cloud) drivers.
- Color Control
- Brightness Control
- Light Temperature Control
- Rate limit management
- Fast Local Network operation
