This is a high Amp version 5V / 4A Wall power supply approved for the Magic Cube and is designed to run the Magic Cube with WiFi + BLE + ZWave + Zigbee Adapter. The cable of the length is optimally designed not degrade the power output at the tip.
Transmission Rate | 10/100/1000Mbps |
Communication Mode | Full-Duplex & Half-Duplex |
Function | POE |
Input Voltage | 48-56V |
Output Voltage | 5V / 4 A or 5V / 5A |
IEEE Standard | 802.3af |
Material | Plastic |
| Power Port | USB-C |
Data output port: | RJ45 |
Certification | CE FCC RoHS |
20W / 25W
81*28*24mm
5V/4A(20W) | 5V/5A(25W)
Related products
-
In StockMilled Stand for 4 Inch Touch Panel and 5.5 Inch Touch Panel Landscape Mode
Please Login to See Pricing Quick ViewPlease Login to See PricingMilled Stand for 4 Inch Touch Panel and 5.5 Inch Touch Panel Landscape Mode
Please Login to See Pricing
Please Login to See PricingSCREEN SOLD SEPARATELY 🙂
Crafted from a solid 1.5 kg (3.5 lb) block of aluminum, this single-piece, milled desktop stand was designed specifically to support our 4-inch and 5.5-inch touch panel (when used in landscape orientation). Shaped by the hammer and chisel of the mighty Thor himself, the resulting stand is a beautiful, sturdy piece of hardware.
*Screen not included
-
In StockPortrait Desktop Stand for 5.5 Inch Panel
Please Login to See Pricing Quick ViewPlease Login to See PricingPortrait Desktop Stand for 5.5 Inch Panel
Please Login to See Pricing
Please Login to See PricingThe desktop, tabletop, or corner table stand is crafted from a robust single aluminum block, weighing in at 2.8 lbs (1200 grams), making it a heavyweight champion that brings command and control right to your fingertips. Its design is not only functional but also aesthetically pleasing, embodying the elegance of a sculptor’s work rather than that of a mere stand.
Available in gorgeous black.
-
NEWSonoff Zigbee Adapter – Type P
Please Login to See Pricing Quick ViewPlease Login to See PricingSonoff Zigbee Adapter – Type P
Please Login to See Pricing
Please Login to See PricingIncludes a 3 feet USB extension cable needed for reliable connection. Using the USB cable is highly recommended.
Recommended and Tested with the Magic Cube and a plethora Zigbee devices. This adapter is type P which is
- Pre-flashed with Zigbee coordinator firmware out of box
- Supported by the Magic Cube and Ready for plug and use
- Does NOT support Matter
- +20dBm output gain
This is a reliable and a long time tested chip. It’s good ol’ reliable and becoming harder to find.
-
NewNFC Tags and Triggers
This Driver Uses Our New License. To Purchase Click HereThis Driver Uses Our New License. To Purchase Click Here -
Shelly 1L – No Neutral Required
Please Login to See Pricing Quick ViewPlease Login to See PricingShelly 1L – No Neutral Required
Please Login to See Pricing
Please Login to See PricingConvert any existing wall switch into a smart switch without changing the wiring or running new cables with Shelly 1L. The first device in the world that is able to automate even the appliances wired with no neutral present. Thanks to its small size and wide range of voltage support, it’s a real innovation!
This device doesn’t require a Neutral.
This device doesn’t support dry contact. If you want Dry Contact, Use the Shelly 1 – UL listed Here.
-
Shelly 1 – UL Listed – Requires Neutral – Has Dry Contact
Please Login to See Pricing Quick ViewPlease Login to See PricingShelly 1 – UL Listed – Requires Neutral – Has Dry Contact
Please Login to See Pricing
Please Login to See PricingWiFi-operated Relay Switch
This is the higher performance UL listed relay.
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch.
This relay requires a neutral. See Specifications below for more details.
If you are looking for the relay without Neutral, see the Shelly 1L Here
