This is a two-way driver to control and get feedback from supported Magic Cube based Lights. The driver supports, Switches, Dimmers, Light Temperatures, RGB/W/WW. The driver will detect when changes happen outside of the Nice System. The driver is also capable of getting Lighting Groups and creating a single switch for a group of lights connected in the Magic Cube.
If your brand is not listed, please reach out to support@innovo.net with model information.
- Support for Innovo’s Magic Devices
- Auto Discovery of all lights connected to Magic Cube based on manufacturer
- Auto Discover garage doors and install them as lighting devices
- Open listen socket for faster instead of feedback
- Self Healing connection monitor.
- Fast LAN based operation – No internet connection required – For devices that support LAN modes.
- Auto Discovery and Installation of Magic Cube Controller
- Smart Device Installer Settings Page.
- Control Dimming Settings (On / Off / Brightness)
- Control Dimming of Light Bulbs (On / Off / Brightness) [Does not control Temperature or RGB]
- Control Light Settings (On / Off)
- Read Feedback from the lights
- Sync with the lights if changes occur outside of Elan
- Supports any light switch or dimmer that works with Magic Cube
- Mix and Match from different lighting manufacturers in one driver
Any Light Switch or Dimmer that operates from Home Assistant including Insteon.
Magic Cube Light works with Bond Bridge Wiz Lights Tuya Lights Insteon Lights Control 4 Lights Phillips Hue Phillips Dynalite LIFX Lightwave OVeRKIZ | MyQ Garage Doors Aladdin Garage Doors Somfy Blinds Eufy Everlights Ikea Lights Feit Electric Leviton Decora Xiaomi Yeelights And Many Many More.
|
Related products
-
UpdatedMagic Cube Sensors (T/H/Motion/Lux/AQ)
To Purchase Click Here -
UpdatedMagic Cube Door Locks
This Driver Uses a Stub License. To Purchase Click Here -
Govee Pro
Please Login to See Pricing Quick ViewPlease Login to See PricingGovee Pro
Please Login to See Pricing
Please Login to See PricingThis is a complete rework from the ground up of our popular Govee driver. This driver has been elevated to Pro level.
The Pro driver will install two lighting sub-drivers, one for LAN (if available) and one for Cloud (if available). It supports both LAN mode devices and Cloud devices with Innovo’s signature Device Intelligence Detection. The driver will recognize if the device is cloud or LAN based and add it to the appropriate section without duplicating a device across.
We have also enhanced our timeout and cloud rate limit handling with our Elastic Polling technology. While this doesn’t no eliminate rate limits for cloud accounts, it cuts it down significantly. And since we separate the LAN based devices, rate limits don’t apply and we can poll as often as needed.
Govee makes affordable and brilliant LED and LED Strip lights. Connect them to Nice and bring a little brightness to your project.
The Driver Supports
- Auto Installation For Govee(LAN,Cloud) drivers.
- Color Control
- Brightness Control
- Light Temperature Control
- Rate limit management
- Fast Local Network operation
-
Genie Aladdin Connect
Quick ViewPlease Login to See PricingGenie Aladdin Connect
Please Login to See PricingThis driver will install Aladdin Genie Garage Door Opener. This driver has been updated with the API changes that occurred on Jan 14, 2024. Make sure to update your door’s firmware first by opening the Genie App and accepting the upgrade.
This is a two-way driver to control the Genie Aladdin Connect Garage door openers with feedback
The Nice controller is capable of controlling the Aladdin Connect Garage door opener and receiving status and battery life feedback.
Newly added features include battery life event trigger that can be used to trigger notifications or other events when the battery is low.
-
Netio
Please Login to See Pricing Quick ViewPlease Login to See PricingNetio
Please Login to See Pricing
Please Login to See PricingThis is an official driver to connect Netio Smart Power Sockets to Elan Controllers.
NETIO is commercial grade, rack ready smart power sockets that can be controlled over LAN and WiFi. Netio products are programmable and support all common M2M API protocols.
The Elan controller is capable of querying the Netio Power Sockets, controlling on / off / delay on / delay off / toggle triggers, retrieving and displaying device power statistics and usage information. Event maps can be triggered based on the information calculated in the driver.
This driver uses an official API from Netio. Innovo is an official Netio partner. The driver doesn’t use public, hacked or reverse engineered API calls.
To Download an evaluation version, click here. Do purchase a license, click on Add to Order below
-
UpdatedMagic Cube Media (Apple TV, Android, FireTV)
This Driver Uses a Stub License. To Purchase Click Here
