Control your RGBW strip or split out relay to support 4 X white channel.
Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
Note: The White channel does not support Temperature changing, only dimming settings.
- Supported by the Elan Driver
- Control your RGBW strip from your mobile phone.
- Shelly RGBW connects like any LED controller.
- Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
- The main benefit is that you will be able to control your light directly from a mobile device.
POWER | |
Power supply AC | No |
Power supply DC | 12 – 24V |
DC Power Output 12V per channel | 45W |
DC Power Output 24V per channel | 90W |
DC Power Output 12V combined power | 144W |
DC Power Output 24V combined power | 288W |
SPECIAL FUNCTIONS | |
Device temperature protection | No |
Overload protection | No |
Power measurement | Yes |
Dimming | Yes |
Working without a neutral line | No |
FEATURES | |
Colour changing | Yes |
Predefined effects | Yes |
Channels | 4 Channel |
Maximum load | 12A |
Operational temperature | 0°C to + 40 °C |
Device power consumption | < 1 W |
Intelligent On/Off | Yes |
Local and remote control | Yes |
Sunrise/Sunset | Yes |
Weekly Schedule | Yes |
UL Listed option | No |
CONNECTIVITY | |
Wireless | Yes |
Wi-Fi Protocol | 802.11 b/g/n |
Wi-Fi Radio frequency | 2412 – 2484 MHz |
Wi-Fi Radio signal power | 1mW |
Wi-Fi Range | up to 50 m outdoors and up to 30 m indoors (depending on the building materials) |
DIMENSIONS | |
Size | 43mm x 38mm x 14mm |
Related products
-
NEW
Magic Cube Power Adapter
Please Login to See Pricing Quick ViewMagic Cube Power Adapter
Please Login to See Pricing
This is a high Amp version 5V / 4A Wall power supply approved for the Magic Cube and is designed to run the Magic Cube with WiFi + BLE + ZWave + Zigbee Adapter. The cable of the length is optimally designed not degrade the power output at the tip.
-
In Stock
Portrait Desktop Stand for 5.5 Inch Panel
Please Login to See Pricing Quick ViewPortrait Desktop Stand for 5.5 Inch Panel
Please Login to See Pricing
The desktop, tabletop, or corner table stand is crafted from a robust single aluminum block, weighing in at 2.8 lbs (1200 grams), making it a heavyweight champion that brings command and control right to your fingertips. Its design is not only functional but also aesthetically pleasing, embodying the elegance of a sculptor’s work rather than that of a mere stand.
Available in gorgeous black.
SKU: 5desktop Category: HardwarePlease Login to See Pricing -
NEW
POE Adapter for the Magic Cube
Please Login to See Pricing Quick ViewPOE Adapter for the Magic Cube
Please Login to See Pricing
This is a high Amp version and not the standard version
5V / 4A POE high power supply approved for the Magic Cube and is designed to run the Magic Cube with WiFi + BLE + ZWave + Zigbee Adapter with constant power from a single POE ethernet output.
-
NEW
Sonoff Zigbee Adapter – Type P
Please Login to See Pricing Quick ViewSonoff Zigbee Adapter – Type P
Please Login to See Pricing
Includes a 3 feet USB extension cable needed for reliable connection. Using the USB cable is highly recommended.
Recommended and Tested with the Magic Cube and a plethora Zigbee devices. This adapter is type P which is
- Pre-flashed with Zigbee coordinator firmware out of box
- Supported by the Magic Cube and Ready for plug and use
- Does NOT support Matter
- +20dBm output gain
This is a reliable and a long time tested chip. It’s good ol’ reliable and becoming harder to find.
SKU: zigbee-p Categories: Hardware, Magic Cube, Magic Cube HardwarePlease Login to See Pricing -
NEW
Sonoff Zigbee Adapter – Type E
Please Login to See Pricing Quick ViewSonoff Zigbee Adapter – Type E
Please Login to See Pricing
You can pair Zigbee devices directly with the Magic Cube without the need for a hub. Plug in this Zigbee Adapter. Recommended and Tested with the Magic Cube and a plethora Zigbee devices. Choose this adapter if you are planning on flashing it and upgrading devices to use matter sometime in the future.
-
Low Stock
5.5 Inch Touch Panel
Please Login to See Pricing Quick View5.5 Inch Touch Panel
Please Login to See Pricing
In Stock and Ready to Ship.
Say hello to the impressive new 5.5 Inch Touch Panel designed for Nice, Control 4, Lutron, or Rako systems. This touch panel seamlessly connects to the control systems controller and boasts support for most, if not all, app functionalities. It’s not just elegant, but also highly responsive, designed by installers for installers.
Whether you prefer power over Ethernet (POE) or DC (Coming Soon, but not yet available) , this panel has you covered, featuring a built-in dual microphone and speaker, along with an ambient light sensor. It’s even capable of functioning as an intercom, making it ideal for small areas, bedrooms, entrances, or any space that requires a compact screen.
Rest assured, this top-notch device is curated, customized, imported, sold, shipped, and fully supported by Innovo, offering a unique and specialized experience. This exceptional product is not manufactured by the Nice, Control 4, Lutron or Rako corporation.