Upgraded for two garage operation and feedback plus option H&T sensor.
We have partnered with third party vendor to bring you a ready made garage door trigger solution that will operate a MyQ garage door. This device has a Shelly Uni Plus, Chamberlain RF remote, constant power, 12V DC power supply all in a neat fire red package with wires attached and ready to install. This connects WiFi to Nice and gives you feedback for open / close and door status with an extra connected door sensor.
The device now supports two garage doors.
This works in conjunction with our Garage Pro Driver for easy, subscription free, local controlled, no annual fee, no cloud access needed, way to open and control your MyQ (and other brands) garage doors.
Shelly Garage Door
- Works with all MyQ Doors
- No Subscription
- No Cloud access
- No Fees
- Local control
- Immediate Trigger with no delay from cloud services
- Fire Red Special release
- Supported by the Elan Driver
- Ready made
- Shelly 1 Plus Module
- RF Remote ready to pair
- 12 VDC Power Supply
- No Battery
- Mounting Case
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component
- can control any other Wi-Fi device in your home
- temperature protection
Device electrical interfaces
Inputs
1 switch/button input on screw terminal: SW
1 potential-free contacts relay input on screw terminal: I
3 power supply inputs on screw terminals: N (+), L (Ʇ) and 12V
Outputs
1 potential-free contacts relay output on screw terminal: O
Connectivity
Wi-Fi
Bluetooth
Safety features
Overheating protection
Supported load types
Resistive (incandescent bulbs, heating devices)
Capacitive (capacitor banks, electronic equipment, motor start capacitors)
Inductive with RC Snubber (LED light drivers, transformers, fans, refrigerators, air-conditioners)
User interface
Inputs
One (control) button
Press and hold for 5 seconds to enable Device access point and Bluetooth connection.
Press and hold for 10 seconds to factory reset the Device.
Type | Value |
|---|---|
Physical | |
Size (HxWxD): | 37x42x16 ±0.5 mm / 1.46×1.65×0.63 ±0.02 in |
Weight: | 26 g / 0.92 oz |
Mounting: | Wall console |
Screw terminals max torque: | 0.4 Nm / 3.5 lbin |
Conductor cross section: | 0.5 to 1.5 mm² / 20 to 16 AWG |
Conductor stripped length: | 5 to 6 mm / 0.20 to 0.24 in |
Shell material: | Plastic |
Color: | Blue |
Environmental | |
Ambient temperature: | -20 °C to 40 °C / -5 °F to 105 °F |
Humidity | 30 % to 70 % RH |
Max. altitude | 2000 m / 6562 ft |
Electrical | |
Power supply: | 110 – 240 VAC / 24 – 48 VDC / 12 VDC ±10% |
Power consumption: | < 1.2 W |
Output circuits ratings | |
Max switching voltage AC: | 240 V |
Max switching voltage DC: | 30 V |
Max switching current AC: | 16 A |
Max switching current DC: | 10 A |
Sensors, meters | |
Internal-temperature sensor: | Yes |
Radio | |
RF band: | 2400 – 2495 MHz |
Max. RF power: | <20 dBm |
Wi-Fi protocol: | 802.11 b/g/n |
Wi-Fi Range: | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors |
Bluetooth Protocol: | 4.2 |
Bluetooth Range: | Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors |
MCU | |
CPU: | ESP32 |
Flash: | 4 MB |
Firmware capabilities | |
Schedules: | 20 |
Webhooks (URL actions): | 20 with 5 URLs per hook |
Scripting: | Yes |
MQTT: | Yes |
CoAP: | No |
Related products
-
NEWZWave 700 Adapter
Please Login to See Pricing Quick ViewTo Purchase Click Here This product has multiple variants. The options may be chosen on the product pageZWave 700 Adapter
Please Login to See Pricing
PRODUCT HIGHLIGHTS
- 700 Series Z-Wave radio USB stick: more range and fast communication compared to the 500 series
- Ships with the latest SDK: 7.19.2
- Supports S2 security
This is a reliable and a long time tested chip. It’s good ol’ reliable and becoming harder to find.
This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your end devices when buying Z-Wave controllers to include products to your system without issues.
SKU: zwave7 Categories: Hardware, Magic Cube, Magic Cube Hardware -
NEWSonoff Zigbee Adapter – Type P
Please Login to See Pricing Quick ViewPlease Login to See PricingSonoff Zigbee Adapter – Type P
Please Login to See Pricing
Includes a 3 feet USB extension cable needed for reliable connection. Using the USB cable is highly recommended.
Recommended and Tested with the Magic Cube and a plethora Zigbee devices. This adapter is type P which is
- Pre-flashed with Zigbee coordinator firmware out of box
- Supported by the Magic Cube and Ready for plug and use
- Does NOT support Matter
- +20dBm output gain
This is a reliable and a long time tested chip. It’s good ol’ reliable and becoming harder to find.
SKU: zigbee-p Categories: Hardware, Magic Cube, Magic Cube HardwarePlease Login to See Pricing -
NEWSonoff Zigbee Adapter – Type E
Please Login to See Pricing Quick ViewPlease Login to See PricingSonoff Zigbee Adapter – Type E
Please Login to See Pricing
Please Login to See PricingYou can pair Zigbee devices directly with the Magic Cube without the need for a hub. Plug in this Zigbee Adapter. Recommended and Tested with the Magic Cube and a plethora Zigbee devices. Choose this adapter if you are planning on flashing it and upgrading devices to use matter sometime in the future.
-
In StockMagic Cube Aura
Please Login to See Pricing Quick ViewPlease Login to See PricingMagic Cube Aura
Please Login to See Pricing
Please Login to See PricingNOTE: As of April 1, the Magic Cube is no longer shipping with standard Wall Power Supply. It will ship standard with POE Adapter only. If you would like a wall adapter, please add it as separate accessory.
The Magic Cube Aura is a Professional Level robust device that uses real-time communications between Nice, Control 4 and (Coming Soon) Savant and hundreds of devices by providing a middleware hardware that translates commands from Nice to the devices.
It’s lighting fast and provides all the necessary technology to be able to control many devices around the home or business.
A Magic Cube can run multiple drivers and multiple instances of the same driver.
-

Shelly RGBW-2
Please Login to See Pricing Quick ViewPlease Login to See PricingShelly RGBW-2
Please Login to See Pricing
Control your RGBW strip or split out relay to support 4 X white channel.
Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
Note: The White channel does not support Temperature changing, only dimming settings.
SKU: RGBW2 Categories: Electrical, HardwarePlease Login to See Pricing -

Shelly 1 – UL Listed – Requires Neutral – Has Dry Contact
Please Login to See Pricing Quick ViewPlease Login to See PricingShelly 1 – UL Listed – Requires Neutral – Has Dry Contact
Please Login to See Pricing
WiFi-operated Relay Switch
This is the higher performance UL listed relay.
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch.
This relay requires a neutral. See Specifications below for more details.
If you are looking for the relay without Neutral, see the Shelly 1L Here
SKU: 1UL Categories: Electrical, Garage Door, HardwarePlease Login to See Pricing

























