RF Garage Door Opener (Green Box)

This is the Green Box. We have partnered with third party vendor to bring you a ready made garage door trigger solution that will operate a MyQ garage door. This device has a 3-door Chamberlain RF remote, constant power so you never have to change a battery again, 12V DC power supply all in a nice neat nature green package with wires attached and ready to install. This box does NOT have a WiFi trigger device, but you can connect it to your favorite triggering device (up to three).

This works in conjunction with our Garage Pro Driver for easy, subscription free, local controlled, no annual fee, no cloud access needed, way to open and control your MyQ garage door opener.

The Garage Pro Driver is here.

Description

Specifications

Type	Value
Physical
Size (HxWxD):	37x42x16 ±0.5 mm / 1.46×1.65×0.63 ±0.02 in
Weight:	26 g / 0.92 oz
Mounting:	Wall console
Screw terminals max torque:	0.4 Nm / 3.5 lbin
Conductor cross section:	0.5 to 1.5 mm² / 20 to 16 AWG
Conductor stripped length:	5 to 6 mm / 0.20 to 0.24 in
Shell material:	Plastic
Color:	Blue
Environmental
Ambient temperature:	-20 °C to 40 °C / -5 °F to 105 °F
Humidity	30 % to 70 % RH
Max. altitude	2000 m / 6562 ft
Electrical
Power supply:	110 – 240 VAC / 24 – 48 VDC / 12 VDC ±10%
Power consumption:	< 1.2 W
Output circuits ratings
Max switching voltage AC:	240 V
Max switching voltage DC:	30 V
Max switching current AC:	16 A
Max switching current DC:	10 A
Sensors, meters
Internal-temperature sensor:	Yes
Radio
RF band:	2400 – 2495 MHz
Max. RF power:	<20 dBm
Wi-Fi protocol:	802.11 b/g/n
Wi-Fi Range:	Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions)
Bluetooth Protocol:	4.2
Bluetooth Range:	Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions)
MCU
CPU:	ESP32
Flash:	4 MB
Firmware capabilities
Schedules:	20
Webhooks (URL actions):	20 with 5 URLs per hook
Scripting:	Yes
MQTT:	Yes
CoAP:	No

Related products

Shelly Driver + Relay Bundle

	Product	Quantity
	Shelly 1 - UL Listed - Requires Neutral - Has Dry Contact WiFi-operated Relay Switch This is the higher performance UL listed relay. Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch. This relay requires a neutral. See Specifications below for more details. If you are looking for the relay without Neutral, see the Shelly 1L Here	1
	Shelly 2.5 Double Relay or Roller Shutter Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world – Shelly 2.5	1
	Shelly RGBW-2 Control your RGBW strip or split out relay to support 4 X white channel. Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power. Note: The White channel does not support Temperature changing, only dimming settings.	1
	Shelly Dimmer 2 Control a wide range of halogen lights, dimmable LED and ferromagnetic transformers from anywhere with the smallest WiFi-operated dimmer in the world – Shelly Dimmer2 works without a neutral line.	1
	Shelly Pro - Lighting and Sensors (Updated Release) Updated August 13, 2024. Shelly Drivers have been split into the following drivers to accommodate more functions and better Nice Integration. : Shelly Pro (This Driver)- This will install supported lighting devices from Gen1, Gen2 & Gen3. It will also install the lighting switch portion of PM and EM Gen 1 & Gen 2 devices. This will also install all Gen 1 Sensors and Gen 2 Pro PM sensors using a custom interface. The interface has to be connected manually using the configurator. For the newest gauge display use our Shelly Utilities for Gen 2, Pro and EM devices. Shelly Utilities - This will install all Gen 2 and Gen 3 sensors. This uses the Elan Utility tab and will not work with Gen 1 Sensors. Shelly Climate - This will install the Shelly TRV under the climate tab. Shelly Uni Plus - This will install the Shelly Uni Plus under the Utilities tab. We also have a version of the Uni Plus designed for the Garage Doors available in our Garage Pro driver. Updated and rebuilt from the ground up, the Shelly Pro is all in one driver for all types of Shelly products including lighting relays, climate control and sensors. The Shelly Pro is updated with support for the new Shelly Plus devices, new graphics and a more robust way of reading sensor values. It also now supports the Pro 4PM, Pro 2PM, Pro 1PM, I4, EM and EM3 with Energy Monitoring and costs. For a complete list see our devices. For a the more modern utilities Gauges, please use our Shelly Utilities Driver. The Shelly Pro is an incredible professional-grade driver developed in official partnership with Shelly. It's designed for top-tier Nice dealers who want to streamline the installation process with a simple, few-clicks pro driver for installing and managing over 55 different Shelly devices. This driver utilizes the most advanced installation and Smart Mode Discovery© available for Nice Controllers, making it an amazing tool for professional installation and management. Temporarily unavailable	1