This is the UL listed premium relay.
Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch with 16A UL Listed WiFi-operated relay switch with Power Management.
- Supported by the Elan Driver
- has an embedded webserver
- has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.
- can be used for electrical circuits (up to 3.5 kW) with energy consumption monitoring, overload, and temperature protection.
| POWER | |
| Power supply AC | 110-230V ±10%, 50/60Hz |
| Power supply DC | 30 – 50V |
| SPECIAL FUNCTIONS | |
| Dry contacts | No |
| Roller shutter mode | No |
| Device temperature protection | Yes |
| Overload protection | Yes |
| Power measurement | Yes |
| Working without a neutral line | No |
| FEATURES | |
| Channels | 1 Channel |
| Maximum load | 16A |
| Operational temperature | 0°C to + 40 °C |
| Device power consumption | < 1 W |
| Intelligent On/Off | Yes |
| Local and remote control | Yes |
| Sunrise/Sunset | Yes |
| Weekly Schedule | Yes |
| UL Listed option | Yes |
| CONNECTIVITY | |
| Wireless | Yes |
| Wi-Fi Protocol | 802.11 b/g/n |
| Wi-Fi Radio frequency | 2412 – 2484 MHz |
| Wi-Fi Radio signal power | 1mW |
| Wi-Fi Range | up to 50 m outdoors and up to 30 m indoors (depending on the building materials) |
| DIMENSIONS | |
| Size | 41mm x 36mm x 17mm |
Related products
-
NEWMagic Cube Power Adapter
Please Login to See Pricing Quick ViewPlease Login to See PricingMagic Cube Power Adapter
Please Login to See Pricing
Please Login to See PricingThis is a high Amp version 5V / 4A Wall power supply approved for the Magic Cube and is designed to run the Magic Cube with WiFi + BLE + ZWave + Zigbee Adapter. The cable of the length is optimally designed not degrade the power output at the tip.
-
In StockMilled Stand for 5.5 Inch Touch Panel Portrait Mode
Please Login to See Pricing Quick ViewPlease Login to See PricingMilled Stand for 5.5 Inch Touch Panel Portrait Mode
Please Login to See Pricing
Please Login to See PricingSCREEN SOLD SEPARATELY 🙂
Crafted from a solid 3 kg (7 lb) block of aluminum, this single-piece, milled desktop stand was designed specifically to support our 5.5-inch touch panel in portrait mode. Shaped by the hammer and chisel of the mighty Thor himself, the resulting stand is a beautiful, sturdy piece of hardware.
*Screen not included
-
NEWPOE Adapter for the Magic Cube
Please Login to See Pricing Quick ViewPlease Login to See PricingPOE Adapter for the Magic Cube
Please Login to See Pricing
Please Login to See PricingThis is a high Amp version and not the standard version
5V / 4A POE high power supply approved for the Magic Cube and is designed to run the Magic Cube with WiFi + BLE + ZWave + Zigbee Adapter with constant power from a single POE ethernet output.
-
Shelly Plus 1
Please Login to See Pricing Quick ViewPlease Login to See PricingShelly Plus 1
Please Login to See Pricing
Please Login to See PricingShelly Plus 1 is a small form factor smart switch with potential-free contacts, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1 can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1 has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
-
NEWWall Mount Adapter for 4 inch Touch Panel
Please Login to See Pricing Quick ViewTo Purchase Click Here This product has multiple variants. The options may be chosen on the product pageWall Mount Adapter for 4 inch Touch Panel
Please Login to See Pricing
The Wall adapter made from a thick single aluminum block. Fits old work and new work 1 & 2-Gang boxes to fit the new Innovo 4 Inch Touch Panel.
The adapter is composed of two parts. The base is made from a thick 5mm steel bloc using CNC and then anodized with a beautiful black finish. Extremely rugged. The cover is made from high end aluminum CNC’d and anodized in black, white, chrome, satin nickel or satin bronze.
For More Detail, download the pdf document below.
Innovo 4 Inch Touch Panel Wall Adapter
The standard 4 Inch panel ships with a 86 back box (86 mm X 86 mm X 35mm) .
-
Connect 3 or 5
